how to reduce algae growth on surface?

Post Reply
User avatar
maxjohnson
Reactions:
Posts: 494
Joined: Thu Dec 12, 2019 12:16 am
Location: OH zone 6

how to reduce algae growth on surface?

#1

Post: # 117072Unread post maxjohnson
Sun Feb 25, 2024 3:36 pm

What do you to to prevent green algae from growing too much on the surface of potting mix? What do you spray on the surface and not harm the seedling and germination rate?

User avatar
worth1
Reactions:
Posts: 17514
Joined: Tue Dec 10, 2019 12:32 pm
Location: 25 miles southeast of Waterloo Texas

Re: how to reduce algae growth on surface?

#2

Post: # 117077Unread post worth1
Sun Feb 25, 2024 4:27 pm

10 percent solution of home use hydrogen peroxide and water in a spray bottle might help and it won't hurt the plants.
It will also stop damping off.
Worth
25 miles southeast of Waterloo Texas.

You can't argue with a closed mind.
You might as well be arguing with a cat.

User avatar
Cole_Robbie
Reactions:
Posts: 1620
Joined: Tue Dec 10, 2019 11:58 pm

Re: how to reduce algae growth on surface?

#3

Post: # 117083Unread post Cole_Robbie
Sun Feb 25, 2024 5:06 pm

I usually cover seeds in vermiculite to sprout them, and then having the top layer of media be loose and dry helps against algae. Perlite or sand would be similar. And bottom watering also helps.

User avatar
bower
Reactions:
Posts: 6634
Joined: Thu Dec 12, 2019 12:44 pm
Location: Newfoundland, Canada

Re: how to reduce algae growth on surface?

#4

Post: # 117092Unread post bower
Sun Feb 25, 2024 6:21 pm

I always take algae as a sign it's too acid - sprinkle of lime works.
AgCan Zone 5a/USDA zone 4
temperate marine climate
yearly precip 61 inches/1550 mm

User avatar
AZGardener
Reactions:
Posts: 794
Joined: Wed Dec 11, 2019 9:12 am
Location: Arizona, USA

Re: how to reduce algae growth on surface?

#5

Post: # 141887Unread post AZGardener
Tue Dec 31, 2024 7:30 pm

I moisten my seed starting mix with boiling water. I then water seedlings with bottled water until they are planted in the garden. It has solved gnat and algae issues. I've also moistened the seed starting mix, then bake it until the internal temp of the soil in the pan reaches 165F or 73.8C HTH
USDA Zone 9b, Sunset Zone 13
Average Rainfall 9.5 inches
Climate: Sonoran Desert

User avatar
zeuspaul
Reactions:
Posts: 2158
Joined: Sat Mar 14, 2020 9:24 pm
Location: San Diego County

Re: how to reduce algae growth on surface?

#6

Post: # 141968Unread post zeuspaul
Thu Jan 02, 2025 3:01 am

I don't recall having an issue with algae. I use well drained sifted recycled potting mix with added sifted perlite and worm castings---no sterilization--no domes. I pre germinate and then place under grow lights. I top water. If it's sunny (almost every day) and not too cold I carry the trays outdoors and place in the sunshine, then back inside at the end of daylight.

User avatar
karstopography
Reactions:
Posts: 9143
Joined: Thu Apr 16, 2020 7:15 am
Location: Southeast Texas

Re: how to reduce algae growth on surface?

#7

Post: # 141969Unread post karstopography
Thu Jan 02, 2025 3:46 am

I haven’t had issues with algae either. Absolutely no domes for me. Jiffy soilless seed starting mix as a top layer, Baccto premium potting soil below. Top layer will show signs of drying out a bit (color change) and trays will lighten up a bit before I add additional moisture.

Trays go outside on warmer days, top water only if necessary, mainly heavy misting or gentle sprinkling outdoors.

I don’t keep my trays in a dank basement either. They are either outside weather permitting or in the garage, but either way, there’s plenty of air circulation and sunlight on them if possible.
"No occupation is so delightful to me as the culture of the earth, and no culture comparable to that of the garden."
Thomas Jefferson

User avatar
GoDawgs
Reactions:
Posts: 4446
Joined: Thu Dec 12, 2019 6:38 am
Location: Zone 8a, Augusta GA

Re: how to reduce algae growth on surface?

#8

Post: # 142098Unread post GoDawgs
Fri Jan 03, 2025 9:35 pm

Like @karstopography I grow all of my seedlings just a tad on the dry side. Not really dry but if the containers start feeling a little light I water from the top sparingly. No gnat or green problems. They are grown indoors under lights and then hardened off out on the front porch when it's time.

User avatar
JayneR13
Reactions:
Posts: 596
Joined: Tue Dec 08, 2020 9:26 am
Location: Wisconsin zone 5B

Re: how to reduce algae growth on surface?

#9

Post: # 144528Unread post JayneR13
Sat Feb 08, 2025 9:02 am

I have had this problem. I grow my pre-sprouted seeds in a potting mix covered with plastic until the seedlings appear. Then I give a small shot of water several times per day until the root system gets established, decreasing how often along the way. I have my seedling rack in a spare bedroom and open the window if I can. I also use a heat mat since March-April can still be quite cold here. I find that breaking up the soil with my fingers and allowing it to breathe definitely helps get rid of any mold. I may give the peroxide a try.

I tried baking my mushroom mix back when I was growing them. No dice. Five hours in the oven and I never got a single shroom from the monotub! And the house stank, not to mention what that does to my energy bill. No thanks in my nursery.
“People who say it cannot be done should not interrupt those who are doing it.”

George Bernard Shaw

AKgardener
Reactions:
Posts: 1389
Joined: Fri May 22, 2020 1:28 pm

Re: how to reduce algae growth on surface?

#10

Post: # 144547Unread post AKgardener
Sat Feb 08, 2025 12:36 pm

I have well water I also get a little bit but not enough to cause it to be covered I usually keep my ceiling fan on all day .. I do sterilize my mix with boiling water and for the most part I never get gnats every now and then I still get a few regardless but never a bad infestation..

User avatar
pepperhead212
Reactions:
Posts: 3694
Joined: Mon Jan 20, 2020 12:07 am
Location: Woodbury, NJ

Re: how to reduce algae growth on surface?

#11

Post: # 144561Unread post pepperhead212
Sat Feb 08, 2025 6:57 pm

I make my own seed starter mix every year - relatively simple, with just about 65% peat and coir mixed, then 10% worm castings (add this after the heating), and 20% perlite and 5% granular DE. I sterilize it by heating it in a foil tray in my grill heated to 175°, or thereabouts, and then I let it cool off. When cooled off, I mix in the worm castings, then some of that granular micorrhyzae, and mix well, then I moisten it with some filtered water with a little of the hydroponics nutrients I use (MaxiGro, for greens, and some silicate nutrient, which I've found helps get stronger stems), and a small amount of the liquid Bt israelensis (Microbe Lift), to prevent any possibility of fungus gnats. I only use that once, but add the small amount of hydro nutrients every time I water (a tsp of Maxigro, and 1/4 tsp of the silicate solution to a gallon), but I let them dry out somewhat each time. The hydro nutrients and worm castings are the only fertilizer I add. I never have algae problems, in the time the seedlings take to grow to size.
Woodbury, NJ zone 7a/7b

Homegrwoninillinois
Reactions:
Posts: 181
Joined: Tue Feb 13, 2024 7:40 pm
Location: Illinois

Re: how to reduce algae growth on surface?

#12

Post: # 144579Unread post Homegrwoninillinois
Sat Feb 08, 2025 9:41 pm

I bottom water only and run a fan letting the top portion of soil dry out pretty well before watering from the bottom again.
Tomato and pepper collector :D Zone 6a, Northern Illinois.

Post Reply

Return to “Seed Saving Methods, Tips & Discussion”